No. 26, Jalan P2/3, Seksyen 2, Bandar Teknologi Kajang, 43500 Semenyih, Selangor, Malaysia.
Mobile No.
016-2555 632
E-mail:
Electrical Insulation Rubber Mat
Switchboard matting is a non-conductive high-density rubber compound engineered to prevent electric shock around high-voltage equipment.
The non-conductive rubber compound creates an insulating barrier between the electrical source and the ground.
RoHS 2, IEC 61111:2009 Class 0
Model: GS-LV (Low Voltage)
A) Product Name
Model: GS-LV (Low Voltage) Corrugated Switchboard Matting / Non-Conductive Switchboard Mat / Dielectric / Low Voltage Insulation Rubber Mat
B) Raw Material
NATURAL RUBBER (NR) BASED POLYMER
C) Scope
Our GS-LV is tested according to IEC61111:2009 Clause 5.6.4.3 under IEC 61111:2009 Class 0, Ideal for Dielectric Voltage / Withstand Voltage: 10,000 VAC and Recommended Maximum use Voltage: 1,000 VAC ( Low Voltage Switchboard Matting )
D) Characteristics
1) Brand: GSE™ ( eRubber and Heat Insulation Mall ® )
2) Model: GS-LV Switchboard Matting / High Voltage Insulation Rubber Mat
3) Top Surface - Anti-slip corrugated, with an anti-slip corrugated surface to provide a safe working environment, the pattern surface “grabs” the bottom of footwear, improving traction and safety.
4) Colour: Grey
5) Test Certificate IEC61111:2009 Withstand Voltage 5.6.4.3: Tested by 3rd Party Accredited Laboratory (TNB Labs)
6) Test Certificate ASTM D635: 2018 - Standard Test Method for Rate of Burning and/or Extent and Time of Burning of Plastics in a Horizontal Position: Tested by 3rd Party Accredited Laboratory (SIRIM)
7) Test Certificate RoHS Directive Commission Directive (EU) 2015/863: Tested by 3rd Party Accredited Laboratory (SGS) RoHS 1 & 2
8) Product Compliance Status:-
A) BS EN 61111 Clause 5.6.4.3 Class 0, Voltage Withstand Test
B) Comply with RoHS I & II
E) Specifications
1) Nominal Thickness: 2.5mm
A) Brand: GSE™, Model: GS-LV, Switchboard Matting,
(GREY color) , 2.5mm Tk x 915mm ( 3ft ) Width x 10,000mm ( 10 m ) Length / roll
RoHS 2, IEC 61111:2009 Class 1
Model: GS-SL
A) Product Name
Model: GS-SL Corrugated Switchboard Matting / Non-Conductive Switchboard Mat / Dielectric / High Voltage Insulation Rubber Mat
B) Raw Material
NATURAL RUBBER (NR) BASED POLYMER
C) Scope
Our GS-SL is tested according to IEC61111:2009 Clause 5.6.4.3 under IEC 61111:2009 Class 1, Ideal for Dielectric Voltage / Withstand Voltage: 20,000 VAC and Recommended Maximum use Voltage: 7,500 VAC
D) Characteristics
1) Brand: GSE™ ( eRubber and Heat Insulation Mall ® )
2) Model: GS-SL Switchboard Matting / High Voltage Insulation Rubber Mat
3) Top Surface - Anti-slip corrugated, with an anti-slip corrugated surface to provide a safe working environment, the pattern surface “grabs” the bottom of footwear, improving traction and safety.
4) Color: Black
5) Test Certificate IEC61111:2009 Withstand Voltage 5.6.4.3: Tested by 3rd Party Accredited Laboratory (TNB Labs)
6) Test Certificate ASTM D635: 2018 - Standard Test Method for Rate of Burning and/or Extent and Time of Burning of Plastics in a Horizontal Position: Tested by 3rd Party Accredited Laboratory (SIRIM)
7) Test Certificate RoHS Directive Commission Directive (EU) 2015/863: Tested by 3rd Party Accredited Laboratory (SGS) RoHS 1 & 2
8) Product Compliance Status:-
A) BS EN 61111 Clause 5.6.4.3 Class 1, Voltage Withstand Test
B) Comply with RoHS I & II
E) Specifications
1) Nominal Thickness: 3mm
A) Brand: GSE™, Model: GS-SL, Switchboard Matting,
(Black colour) , 3mm Tk x 915mm ( 3ft ) Width x 10,000mm ( 10 m ) Length / roll
RoHS 2, IEC 61111:2009 Class 2
Model: GS-MV
A) Product Name
Model: GS-MV (Medium Voltage) Corrugated Switchboard Matting / Non-Conductive Switchboard Mat / Dielectric / Medium Voltage Insulation Rubber Mat
B) Raw Material
NATURAL RUBBER (NR) BASED POLYMER
C) Scope
Our GS-MV is tested according to IEC61111:2009 Clause 5.6.4.3 under IEC 61111:2009 Class 2, Ideal for Dielectric Voltage / Withstand Voltage: 30,000 VAC and Recommended Maximum use Voltage: 17,000 VAC
D) Characteristics
1) Brand Name: GSE™ ( eRubber and Heat Insulation Mall ® )
2) Model: GS-MV Switchboard Matting / Medium Voltage Insulation Rubber Mat
3) Top Surface - Anti-slip corrugated, with an anti-slip corrugated surface to provide a safe working environment, the pattern surface “grabs” the bottom of footwear, improving traction and safety.
4) Colour: Black
5) Test Certificate IEC61111:2009 Withstand Voltage 5.6.4.3: Tested by 3rd Party Accredited Laboratory (TNB Labs)
6) Test Certificate ASTM D635: 2018 - Standard Test Method for Rate of Burning and/or Extent and Time of Burning of Plastics in a Horizontal Position: Tested by 3rd Party Accredited Laboratory (SIRIM)
7) Test Certificate RoHS Directive Commission Directive (EU) 2015/863: Tested by 3rd Party Accredited Laboratory (SGS) RoHS 1 & 2
8) Product Compliance Status:-
A) BS EN 61111 Clause 5.6.4.3 Class 2, Voltage Withstand Test
B) Comply with RoHS I & II
E) Specifications
1) Nominal Thickness: 5mm
A) Brand: GSE™, Model: GS-MV, Switchboard Matting,
(Black colour) , 5mm Tk x 1,000mm (1 m ) Width x 6,000mm ( 6 m ) Length / roll
RoHS 2, IEC 61111:2009 Class 2
Model: GS-SM
A) Product Name
Model: GS-SM Diamond Switchboard Matting / Non-Conductive Switchboard Mat / Dielectric / High Voltage Insulation Rubber Mat
B) Raw Material
NATURAL RUBBER (NR) BASED POLYMER
C) Scope
Our GS-SM is tested according to IEC61111:2009 Clause 5.6.4.3 under IEC 61111:2009 Class 2, Ideal for Dielectric Voltage / Withstand Voltage: 30,000 VAC and Recommended Maximum use Voltage: 17,000 VAC
D) Characteristics
1) Brand Name: GSE™ ( eRubber and Heat Insulation Mall ® )
2) Model: GS-SM Switchboard Matting / High Voltage Insulation Rubber Mat
3) Top Surface - Anti Slip Diamond, with an anti-slip diamond surface to provide a safe working environment, pattern surface “grabs” the bottom of footwear, improving traction and being safe from slippery.
4) Colour: Black
5) Test Certificate IEC61111:2009 Withstand Voltage 5.6.4.3: Tested by 3rd Party Accredited Laboratory (TNB Labs)
6) Test Certificate RoHS Directive Commission Directive (EU) 2015/863: Tested by 3rd Party Accredited Laboratory (SGS) RoHS 1 & 2
7) Product Compliance Status: -
A) BS EN 61111 Clause 5.6.4.3 Class 2, Voltage Withstand Test
B) Comply with RoHS I & II
E) Specifications
1) Nominal Thickness: 5mm
A) Brand: GSE™, Model: GS-SM, Switchboard Matting,
(Black colour) , 5mm Tk x 1,000mm (1 m ) Width x 6,000mm ( 6 m ) Length / roll
RoHS 2, IEC 61111:2009 Class 3
Model: GS-SMG
A) Product Name
Model: GS-SMG Diamond Switchboard Matting / Non-Conductive Switchboard Mat / Dielectric / High Voltage Insulation Rubber Mat
B) Raw Material
NATURAL RUBBER (NR) BASED POLYMER
C) Scope
Our GS-SMG is tested according to IEC61111:2009 Clause 5.6.4.3 under IEC 61111:2009 Class 3, Ideal for Dielectric Voltage / Withstand Voltage: 40,000 VAC and Recommended Maximum use Voltage: 26,500 VAC
D) Characteristics
1) Brand Name: GSE™ ( eRubber and Heat Insulation Mall ® )
2) Model: GS-SMG Switchboard Matting / High Voltage Insulation Rubber Mat
3) Top Surface - Anti Slip Diamond, with an anti-slip diamond surface to provide a safe working environment, the pattern surface “grabs” the bottom of footwear, improving traction and being safe from slipping.
4) Colour: Grey
5) Test Certificate IEC61111:2009 Withstand Voltage 5.6.4.3: Tested by 3rd Party Accredited Laboratory (TNB Labs)
6) Test Certificate RoHS Directive Commission Directive (EU) 2015/863: Tested by 3rd Party Accredited Laboratory (SGS) RoHS 1 & 2
7) Product Compliance Status: -
A) BS EN 61111 Clause 5.6.4.3 Class 3, Voltage Withstand Test
B) Comply with RoHS I & II
E) Specifications
1) Nominal Thickness: 5mm
A) Brand: GSE™, Model: GS-SMG, Switchboard Matting,
( Grey colour ) , 5mm Tk x 1,000mm (1 m ) Width x 6,000mm ( 6 m ) Length / roll
RoHS 2, IEC 61111:2009 Class 4
Model: GS-HV
A) Product Name
Model: GS-HV Corrugated Switchboard Matting / Non-Conductive Switchboard Mat / Dielectric / High Voltage Insulation Mat
B) Raw Material
RoHS-2 THERMOPLASTIC ELASTOMER
C) Scope
Our GS-HV is tested according to IEC61111:2009 Clause 5.6.4.3 under IEC 61111:2009 Class 4, Ideal for Dielectric Voltage / Withstand Voltage: 50,000 VAC and Recommended Maximum use Voltage: 36,000 VAC.
D) Characteristics
1) Brand Name: GSE®
2) Model: GS-HV Switchboard Matting / High Voltage Insulation Rubber Mat
3) Top Surface - Anti-slip corrugated, with an anti-slip corrugated surface to provide a safe working environment, the pattern surface “grabs” the bottom of footwear, improving traction and safety.
4) Colour: Grey
5) Test Certificate IEC61111:2009 Withstand Voltage 5.6.4.3: Tested by 3rd Party Accredited Laboratory (TNB Labs)
6) Test Certificate RoHS Directive Commission Directive (EU) 2015/863: Tested by 3rd Party Accredited Laboratory (SGS) RoHS 1 & 2
7) Product Compliance Status: -
A) BS EN 61111 Clause 5.6.4.3 Class 3, Voltage Withstand Test
B) Comply with RoHS I & II
E) Specifications
1) Nominal Thickness: 7mm
A) Brand: GSE™, Model: GS-HV, Switchboard Matting,
( Grey colour ) , 7mm Tk x 1,000mm (1 m ) Width x 6,000mm ( 6 m ) Length / roll
RoHS 2, IEC 61111:2009 Class 4
Model: GS-SLG
A) Product Name
Model: GS-SLG Corrugated Switchboard Matting / Non-Conductive Switchboard Mat / Dielectric / High Voltage Insulation Rubber Mat
B) Raw Material :
NATURAL RUBBER (NR) BASED POLYMER
C) Scope
Our GS-SLG is tested according to IEC61111:2009 Clause 5.6.4.3 under IEC 61111:2009 Class 4, Ideal for Dielectric Voltage / Withstand Voltage : 50,000 VAC and Recommended Maximum use Voltage : 36,000 VAC
D) Characteristics
1) Brand Name: GSE™ ( eRubber and Heat Insulation Mall ® )
2) Model: GS-SLG Switchboard Matting / High Voltage Insulation Rubber Mat
3) Top Surface - Anti Slip Corrugated, with an anti-slip corrugated surface to provide a safe working environment, the pattern surface “grabs” the bottom of footwear, improving traction and safety.
4) Colour: Grey
5) Test Certificate IEC61111:2009 Withstand Voltage 5.6.4.3: Tested by 3rd Party Accredited Laboratory (TNB Labs)
6) Test Certificate ASTM D635: 2018 - Standard Test Method for Rate of Burning and/or Extent and Time of Burning of Plastics in a Horizontal Position: Tested by 3rd Party Accredited Laboratory (SIRIM)
7) Test Certificate RoHS Directive Commission Directive (EU) 2015/863: Tested by 3rd Party Accredited Laboratory (SGS) RoHS 1 & 2
8) Product Compliance Status: -
A) BS EN 61111 Clause 5.6.4.3 Class 4, Voltage Withstand Test
B) Comply with RoHS I & II
E) Specifications
1) Nominal Thickness: 6mm
A) Brand: GSE™, Model: GS-SLG, Switchboard Matting,
(GREY colour) , 6mm Tk x 1,000mm ( 1m ) Width x 6,000mm ( 6 m ) Length / roll
.jpg)
_edited.jpg)
Non-RoHS 2, IEC 61111:2009 Class 0
Model: SBR10
A) Product Name
Model: SBR10 (Low Voltage) Corrugated Switchboard Matting / Non-Conductive Switchboard Mat / Dielectric / Medium Voltage Insulation Rubber Mat
B) Raw Material:
SBR + NATURAL RUBBER BASE POLYMER
C) Scope
Our SBR10 is tested according to IEC61111:2009 Clause 5.6.4.3 under IEC 61111:2009 Class 0, Ideal for Dielectric Voltage/Withstand Voltage: 20,000VAC and Recommended Maximum use Voltage: 1,000VAC
D) Characteristics
1) Brand Name: GSE™ ( eRubber and Heat Insulation Mall ® )
2) Model: SBR10 Switchboard Matting / Low Voltage Insulation Rubber Mat
3) Top Surface - Anti Slip Corrugated, with an anti-slip Corrugated surface to provide a safe working environment, the pattern surface “grabs” the bottom of footwear, improving traction and safe from slippery.
4) Colour: Black
5) TNB Test Certificate IEC61111:2009 Withstand Voltage 5.6.4.3
6) Product Compliance Status: -
A) BS EN 61111 Clause 5.6.4.3 Class 0, Voltage Withstand Test for 180 Seconds (3 Minutes)
B) Non-RoHS I & II
E) Specifications
1) Nominal Thickness: 3mm
A) Brand: GSE™, Model: SBR10, Corrugated Switchboard Matting, (Black colour) , 3mm Tk x 1,000mm (1m) Width x 10,000mm (10m) Length/roll
_edited.jpg)
Non-RoHS 2, IEC 61111:2009 Class 1
Model: SBR20
A) Product Name
Model: SBR20 (Medium Voltage) Diamond Switchboard Matting / Non-Conductive Switchboard Mat / Dielectric / Medium Voltage Insulation Rubber Mat
B) Raw Material:
SBR + NATURAL RUBBER BASE POLYMER
C) Scope
Our SBR20 is tested according to IEC61111:2009 Clause 5.6.4.3 under IEC 61111:2009 Class 1, Ideal for Dielectric Voltage/Withstand Voltage: 20,000VAC and Recommended Maximum use Voltage: 7,500VAC
D) Characteristics
1) Brand Name: GSE™ ( eRubber and Heat Insulation Mall ® )
2) Model: SBR20 Switchboard Matting / Medium Voltage Insulation Rubber Mat
3) Top Surface - Anti Slip Diamond, with an anti-slip Diamond surface to provide a safe working environment, the pattern surface “grabs” the bottom of footwear, improving traction and safe from slippery.
4) Colour: Black
5) TNB Test Certificate IEC61111:2009 Withstand Voltage 5.6.4.3.
6) Product Compliance Status: -
A) BS EN 61111 Clause 5.6.4.3 Class 1, Voltage Withstand Test for 180 Seconds (3 Minutes)
B) Non-RoHS I & II
E) Specifications
1) Nominal Thickness: 5mm
A) Brand: GSE™, Model: SBR20, Diamond Switchboard Matting, (Black colour) , 5mm Tk x 1,000mm (1m) Width x 10,000mm (10m) Length/roll
.png)
Non-RoHS 2, IEC 61111:2009 Class 2
Model: SBR30
A) Product Name
Model: SBR30 (Medium Voltage) Corrugated Switchboard Matting / Non-Conductive Switchboard Mat / Dielectric / Medium Voltage Insulation Rubber Mat
B) Raw Material:
SBR + NATURAL RUBBER BASE POLYMER
C) Scope
Our SBR30 is tested according to IEC61111:2009 Clause 5.6.4.3 under IEC 61111:2009 Class 2, Ideal for Dielectric Voltage/Withstand Voltage: 30,000VAC and Recommended Maximum use Voltage: 17,000VAC
D) Characteristics
1) Brand Name: GSE™ ( eRubber and Heat Insulation Mall ® )
2) Model: SBR30 Switchboard Matting / Medium Voltage Insulation Rubber Mat
3) Top Surface - Anti Slip Corrugated, with an anti-slip corrugated surface to provide a safe working environment, the pattern surface “grabs” the bottom of footwear, improving traction and safe from slippery.
4) Colour: Black
5) TNB Test Certificate IEC61111:2009 Withstand Voltage 5.6.4.3.
6) SIRIM Test Certificate ASTM D635: 2018 - Standard Test Method for Rate of Burning and/or Extent and Time of Burning of Plastics in a Horizontal Position.
7) Product Compliance Status: -
A) BS EN 61111 Clause 5.6.4.3 Class 2, Voltage Withstand Test for 180 Seconds (3 Minutes)
B) Non-RoHS I & II
E) Specifications
1) Nominal Thickness: 9.5mm (3/8")
A) Brand: GSE™, Model: SBR30, Corrugated Switchboard Matting, (Black colour), 9.5mm (⅜") Tk x 1,000mm (1m) Width x 6,000mm (6m) Length/roll