Non-Conductive Switchboard Mat / Dielectric / ​Low Voltage Insulation Rubber Mat

A) Product Name
Model: GS‑LV (Low Voltage)
Corrugated Switchboard Matting / Non‑Conductive Switchboard Mat / Dielectric Mat / Low Voltage Insulation Rubber Mat.
The corrugated ridges run parallel to the length of the roll.

​

B) Raw Material
RoHS‑2 compliant Natural Rubber (NR) base polymer.

​

C) Purpose
Switchboard matting is a non‑conductive, high‑density rubber compound engineered to prevent electric shock around high‑voltage equipment.
It creates an insulating barrier between the electrical source and the ground, enhancing operator safety.

​

D) Scope
The GS‑LV model complies with IEC 61111:2009 Class 0.
•     Dielectric / Withstand Voltage: 10,000 VAC
•     Recommended Maximum Use Voltage: 1,000 VAC
(Suitable for Low Voltage Switchboard Matting applications)

​

E) Characteristics
1.     Brand: GSE®
2.     Model: GS‑LV (Low Voltage) Switchboard Matting / Low Voltage Insulation Rubber Mat
3.     Top Surface: Anti‑slip corrugated design that enhances traction. The ribbed pattern “grips” footwear to reduce slipping and improve workplace safety.
4.     Colour: Grey
5.     Test Certificate – IEC 61111:2009 (Withstand Voltage 5.6.4.3):
Tested by TNB Labs (3rd‑party accredited laboratory).
6.     Test Certificate – ASTM D635:2018
Standard Test Method for Rate of Burning and/or Extent and Time of Burning of Plastics in a Horizontal Position.
Tested by SIRIM (3rd‑party accredited laboratory).
7.     Test Certificate – RoHS Directive (EU) 2015/863:
Tested by SGS (3rd‑party accredited laboratory), RoHS 1 & 2 compliant.

8.     Product Compliance Status:
A.     BS EN 61111 Clause 5.6.4.3 Class 0 – Voltage Withstand Test
B.     Complies with RoHS I & II (Restriction of Hazardous Substances).
Commission Directive (EU) 2015/863 adds four phthalates (BBP, DBP, DEHP, DIBP—commonly used to soften PVC and vinyl) into Annex II of the RoHS Recast Directive.
Each phthalate is restricted to ≤0.1% (1,000 ppm) in any homogeneous material of an electrical product.

​

F) Specifications
1.     Nominal Thickness: 2.5 mm
2.     Standard: BS EN 61111:2009 Class 0 (Withstood 10 kV)
•     Model: GS‑LV
•     Colour: Grey
•     Dimensions per Roll: 2.5 mm thickness × 915 mm (3 ft) width × 10,000 mm (10 m) length
3.     Weight per Roll: Approximately 38 kg

Genuine Identification Marking
Each roll is marked with:
•     Model No
•     Nominal Maximum Use Voltage
•     IEC 61111:2009 Class
•     Colour Code Label