top of page

Non Conductive Switchboard Mat ( Switchboard Matting ) Malaysia :-

Model : GS-SMG, ( Medium High Voltage )
Top Surface : Anti Slip Diamond
IEC 61111:2009 : CLASS 3,
Dielectric Test Voltage : 40kV , (40,000 V)
Nominal Maximum Use Voltage : 26.5kV (26,500 V)

TNB √ SGS √

GS-SMG 40kV roll type.jpg

A) Product Name
Model: GS-SMG ( Medium-High Voltage ), Diamond Switchboard Matting / Non-Conductive Switchboard Mat / Dielectric / High Voltage Insulation Rubber Mat

B) Raw Material
RoHS-2 NATURAL RUBBER ( NR ) BASE POLYMER

C) Purpose
Switchboard matting is a non-conductive high-density rubber compound engineered to prevent electric shock around high voltage equipment.
The non-conductive rubber compound creates an insulating barrier between the electrical source and the ground.

D) Scope
Our GS-SMG ( Medium-High Voltage ) is under IEC 61111:2009 Class 3, Ideal for Dielectric Voltage / Withstand Voltage: 40,000 VAC and Recommended Maximum use Voltage: 26,500 VAC ( High Voltage Switchboard Matting )

E) Characteristics
1) Brand: GSE ®
2) Model: GS - SMG ( Medium-High Voltage ), Switchboard Matting / High Voltage Insulation Rubber Mat
3) Top Surface - Anti Slip Diamond, with the anti-slip diamond surface to provide a safe working environment, the pattern surface “grabs” the bottom of footwear, improving traction and safety from slippery.
4) Colour: Grey
5) Test Certificate IEC61111:2009 Withstand Voltage 5.6.4.3:

​Tested by 3rd Party Accredited Laboratory (TNB Labs)

​​6) Test Certificate RoHS Directive Commission Directive (EU) 2015/863

​Tested by 3rd Party Accredited Laboratory (SGS) RoHS 1 & 2
​​7) Product Compliance Status:-
​A) BS EN 61111 Clause 5.6.4.3 Class 3, Voltage Withstand Test
B) Comply with RoHS I & II ( RoHS Compliant Product ), ​RoHS, short for Restriction of Hazardous Substances.
​On 4th June 2015, Commission Directive (EU) 2015/863 was published in the Official Journal of the European Union (OJEU) to include the phthalates ( BBP, DBP, DEHP and DIBP, these are used to soften PVC and Vinyl products ) into ANNEX II of the RoHS Recast Directive.
The new law restricts each phthalate to no more than 0.1% ( mg/kg = ppm ; 0.1wt% = 1,000ppm ) in each homogeneous material of an electrical product.

F) Specifications
1) Nominal Thickness : 5mm
A) Model : GS-SMG , Switchboard Matting, ( Grey colour ) , 5mm Tk x 1,000mm (1 m ) Width x 6,000mm (6m) Length / roll ( Approximately ~38kgs / pc )

" GENUINE / IDENTIFICATION MARK “
1) Model, Lot No. , Nominal Maximum Use Voltage, IEC 61111:2009 Class, Test Certificate Number and colour code labelling.

bottom of page